1. Employers are required by OSHA to review emergency evacuations with employees at specific times. Which of the following is NOT one of those times?
|
|
Whenever the plan is changed |
|
|
|
Initially when the plan is developed |
|
|
|
Annually once implemented |
|
|
|
Whenever designated actions under the plan change |
2. What is defined in OSHA Standard 1926.32(f)?
|
|
General Duty Clause |
|
|
|
General Inspection Procedure |
|
|
|
Qualified Person |
|
|
|
Competent Person |
3. Training requirements for gas welding can be found in:
|
|
29 CFR 1926.350 |
|
|
|
29 CFR 1926.351 |
|
|
|
29 CFR 1926.651 |
|
|
|
29 CFR 1926.957 |
4. What is OSHA's first priority for conducting workplace inspections?
|
|
Fatalities |
|
|
|
Employee Complaints |
|
|
|
Imminent Danger |
|
|
|
Planned Inspections |
5. OSHA uses a two-step process to determine if a citation is warranted under the multi-employer worksite policy. The second step of the process is to:
|
|
determine if an OSHA standard was violated. |
|
|
|
determine if the employer's actions were sufficient to meet obligations of OSHA requirement. |
|
|
|
determine if the employer willfully violated the standard. |
|
|
|
determine which employer is the controlling employer. |
Question 6
What are the four classifications of employers under OSHA's multi-employer
worksite policy? How do they relate to each other?
Your response should be at least 75 words in length.
Question 7
According to the OSHA construction standards, what is a competent person?
Discuss two examples of competent person requirements from the construction
standards.
Your response should be at least 75 words in length.
Question 8
Imagine that you are the safety manager on a large construction site and are
notified that an OSHA inspector has arrived at the site gate, inspection
warrant in-hand, requesting access. Describe the procedures you would follow to
accommodate the inspector's request and how the inspection should proceed.
Your response should be at least 200 words in length.
Question 9
Using the requirements for General Duty violations in Chapter 4 of the OSHA
Field Operations Manual (FOM) describe a situation that could be cited as a
violation of the General Duty Clause. Remember that the General Duty Clause can
only be applied if there is no OSHA standard for the hazard. Explain how your
citation meets the four elements listed in the FOM as necessary to prove such a
violation.
Your response should be at least 200 words in length.
